HARNESS D BACK RING CLASS A PASS THRU BUCKLES

Full body harnesses are designed to arrest a fall while simultaneously
distributing the tremendous shock or load to the worker’s body.
There are many applications and conditions in which full body harnesses
must be worn. In order to maximize effectiveness and minimize injury, it is
critical that an appropriate body harness be selected based on the job for
which it is intended. PeakWorks offers a full range of body harnesses for
almost every application.
Full body harnesses must be fitted and tightened properly to ensure
maximum protection and to minimize injury.
Waist or restraint belts are not replacements for full body harnesses.
All PeakWorks full body harnesses are built to meet or exceed the highest
standards while providing maximum fit and comfort.
Full body harnesses come in many styles with a variety of attachment
points (D-rings). The placement of these rings is critical to the type of
application and positioning of the worker when performing a job.
The fall protection industry and regulatory committees have standardized
the positioning of these attachment rings into Harness Classes A, D, E, L, P.
Depending on the application, full body harnesses may require more than
one attachment class in order to correctly position the body and stress points
during a fall, i.e. AE, AL, AP.
All full body harnesses come with a standard Class A D-ring (located at
the back between the shoulder blades).
Certified to both CSA Z259.10 and ANSI Z359 standards
High visibility colour
3 points of adjustment ensuring a good fit (2 leg, 1 chest)
Pass-Thru leg and chest buckles for quick donning
Sub-pelvic strap for added safety and support
Fall indicator for easier inspection before use
Large back D-ring for easy connection
Meets or exceeds all applicable OSHA standards
Polyester webbing
400 lb (180 kg) capacity (combined weight of person, tools, clothing,
etc.)